How to Download And Use QCOM ECMP Multiport Tool

Download Qcom EMCP Multi-Port Software Upgrade Tool

Qcom EMCP Multi-Port Software Upgrade Tool is a more Supported Application for Windows OS installed devices, It supports all versions of Windows OS, which is easy to flash or Install your mobile stock firmware on Qualcomm devices as very few easy steps as follows.

How to use of Qcom EMCP Multi-Port Software Upgrade Tool

Which is comes with portable windows application you don’t need to install, you can download the files from the link below and extract the files on the computer

then open the QCOM_MultiDnload(vc10)_ENU.exe to launch the tool.

It supports you to flash or install stock firmware on devices powered by Qualcomm chipset. you can download the right firmware file of the Qualcomm device.

  • Launch the Qcom EMCP Tool
  • Select the COM Port
  • Load the Firmware in the tool
  • Click on the Start All to begin the installation process.

After installing the Qualcomm USB driver, the firmware tool automatically detects your device and is ready for the flashing process.

It supports flashing or installing the .mbn or .xml based firmware on the Qualcomm Device. You can easily find the .mbn or .xml file in the stock firmware of your Qualcomm Smartphone and Tablet.

Download Qcom EMCP Multi-Port Software Upgrade Tool

Qcom EMCP Multi-Port Software Tool is compatible with Windows OS versions, including Windows XP to Windows 11 (x32 or x64 bit). If in case you were looking for the latest version of the Flash Tool, then use the following links to get it on your computer: – Latest version


Everything is done in very easy and simple steps as Follows.

These are instructions on how to use

Qcom EMCP Multi-Port Software Upgrade Tool to Flash or install Stock Firmware on any Qualcomm chipsets Smartphone and Tablets.

Caution: Flashing or installing firmware using the Qcom EMCP Multi-Port Tool will wipe the data. Therefore, we recommend you take a backup of your data before following the tutorial below.

Install Firmware on Qualcomm Devices using the Qcom EMCP Multi-Port Software Upgrade Tool

  1. Download and extract the Qualcomm USB Driver on your Computer (if in case Qualcomm Drivers are already installed on the computer, then SKIP this step).
  2. Download Stock Firmware (.mbn or .xml based) of your Qualcomm Device and extract it on the computer (you can find the Stock Firmware on TheFirmwareFile or through Google).
  3. Download and extract Qcom EMCP Multi-Port Tool on the Computer. Once Qcom EMCP Multi-Port Tool is extracted, you will be able to see the following files:
  4. Open QCOM_MultiDnload(vc10)_ENU.exe to launch the Tool:
  5. Once Qcom EMCP Multi-Port Tool is launched, you will be able to see the following window:
  6. Connect your Qualcomm Device to the Computer using the USB Cable (make sure the device is Power Off).
  7. Once the device is connected to the Computer, Open Device Manager on the Tool:
  8. Once the Device Manager is Launched, you can see the COM port of your connected Qualcomm Device (remember the COM port and close the device manager).
  9. Now, Tick any of the Port ID to Enable it:
  10. Choose the COM Port (shown in Step#8):
  11. Click on the Software Version button and Locate the Firmware Folder of your Qualcomm Device:
  12. Click on the Start All button to begin the installation process:
  13. Once the installation process is completed, you will be able to see the Upgrade Finished Message on the tool:
  14. Congratulations! Now, Close the Qcom EMCP Multi-Port Tool and Disconnect your Mobile device from the Computer and restart it.