How To use Qgdp Tool and Download Links

Download QGDP Tool (all versions)

QGDP Tool is the successor of YGDP Tool is a more Supported Application for Windows OS installed devices, It supports all versions of Windows OS, which is easy to flash or Install your mobile stock install .cpb firmware on CPB file Using devices as very few easy steps as follows.

QGDP comes as an installer application, which means you have to install it on your computer to use it. In contrast, the QGDP Assembly V3.2.0 comes as a portable application, which doesn’t require you to install it.

The overall interface of the QGDP is the same as YGDP Tool, which also allows you to flash or install the Firmware. However, in QGDP, you will be getting more functions and support to the CPB Stock firmware.

QGDP comes in three variants, i.e., QGDP Assembly, QGDP Customer, and QGDP SMT. Few of the CPB Firmware might not be compatible with the QGDP Assembly; then, in that situation, you can try the QGDP Customer or QGDP SMT version.

YGDP Tool supports much older and latest CPB Firmware, but sometimes it fails to support the latest CPB firmware. In that situation, you will need the QGDP utility, as it supports the latest CPB firmware.

By using the Configuration panel, you can load the CPB firmware on the QGDP Utility. Besides loading the Firmware, it also allows you to check the device name, test the eMMC CID, Test the Fuse information, and Test the instrument information.

Using the QGDP, you can flash the stock firmware on up to 15 devices simultaneously. On the YGDP Tool, you could only flash the Firmware on up to seven devices at a time.

Download QGDP Tool

QGDP is compatible with all versions of Windows OS, including Windows XP to Windows 11 (x32 or x64 bit). If in case you were looking for the latest version of the QGDP, then use the following links to get it on your computer:

Customer:

 

How to flash CPB firmware using QGDP Tool

Caution: Flashing or installing firmware using the QGDP Tool will wipe the data from the device. Therefore, we recommend you take a backup of your data before using the tool.

 

Flash or Install .cpb Firmware (ROM) using QGDP Tool

  1. Download and install the Coolpad Drivers on the Computer (if in case Coolpad Drivers are already installed on the computer, then SKIP this Step).
  2. Download and install QGDP Tool on your computer.
  3. Now, Open the QGDP Flashing Tool (C: > QKXZGJ > QGDP) on the Computer.
  4. Once QGDP Flashing Tool is launched, you will be able to see the following screen:
  5. Now, enter the Password 369 or ase or smt and click on the Login button.
  6. Now, you will be able to see the main screen of the QGDP. Click on the Config button to Continue.
  7. Under the Download Configuration, Click on the Browse Button and Locate the CPB Firmware on your Computer.
  8. Now, Click on the Apply button.
  9. Now, connect your android device to the computer (make sure it is power off and battery installed).
  10. Now, click on the Start Button to begin the flashing.
  11. Once Flashing is completed you will be able to see the green Upgrade Successful message.
  12.   Congratulations, Now disconnect your Android Device from the Computer and Restart it. Once your device is restarted, you will be able to Run the Device without facing any issues